Siemens Deka 63lb EV6 USCAR High Impedance Fuel Injectors

 The New injectors come with an EV6 connector eliminating the need for adapter harnesses. The NEW USCAR 63lb Sieman Deka Injectors are available now  . The New injectors come with an EV6 connector eliminating the need for adapter harnesses. Adding an aftermarket Supercharger/Turbocharger may max out your current injectors. The fuel injector flow must be matched to the airflow requirements of the engine over the entire rpm operating range. The injectors must be able to supply a large amount of fuel at wide-open throttle to prevent high rpm lean out, and transitional amounts to cover all of the operating conditions in between. Supercharged engines in particular place even more rigorous demands on an injector range because of their increased airflow capability.Static Flow Rate (GAS): 62.7 lb/hr = 646 cc/min = 474 g/minDynamic Flow Rate 2.5ms PW @ 100Hz (GAS): 20.2mg/pulseCoil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)Gain: 0.11ms/mgOffset: 0.055msTurn on time @ 14VDC: 1.14ms Turn off time: 0.85ms @ 600KPaFactory Tollerance: +/-6 %Spray Pattern: Cone (4-Hole)Connector: USCAR (Bosch EV6/LS2) You will need to add Fuel Rail Spacer, see drop down menu!